Celtic Continuum 3 & Gear | Gearing Pendant
Simple swirling geometry (and even a gear), this Celtic inspired pendant serves as a ring holder for a Gearing of any size.
Price is without gemstones. All Gearing Pendants come with a Gearing.
Pendant Size 6: Gears do not fit, so we don't sell it in this design.
Pendant Size 7: 19mm x 28.5mm | Small Gear
Pendant Size 10: 21.5mm x 31mm | Small Gear
Pendant Size 11: 22.5mm x 32.5mm | Medium Gear
Pendant Size 14: 25.5mm x 36mm | Large Gear
Note: These sizes are for the pendants without Gearings, which would add a few mm to the width and length.
Look for the Sizing Information tab on this page for more information.
Variation shown has:
- Gears: Thin White Gear
- Gemstone: Peridot in position 1 and position 3
- Gearing Size 11
- Flower Petal Bale
- It is quite possible that this pendant can fit other rings of the same size as well.
- The gear that we use within the center hole is chosen to be the largest one that fits with that ring size.
- This is one of our few examples of pendants where the gears within it don't actually mesh with each other, but they both move.
- We have a variety of gemstones you can use to add color to your piece! they are all 6mm cabochons. When you go to add a gemstone you will see a digital rendering of each kind (also shown below). We have gone to extreme lengths to ensure that the digital renderings of gemstones are as accurate to the real stones as possible, but if you want to see images of the real stones you can find them here.
- If we run out of a gemstone that you order in your piece we will contact you to resolve the situation.
- We use stainless steel, anodized aluminum, and brass as our materials. They can stand the pressure put on the gears better than traditional precious metals like gold and silver.
- We can make our pendant gears in silver and gold, but we cannot do that with the Gearings because of the complexity of their creation.
- Our plates are made of stainless steel and do not contain nickel. They are also non-magnetic.
- For most of our jewellery you can choose between our thick brass gears for some weight, or thin gears in either brass or anodized aluminum. We have the full rainbow, plus black and white (clearcoated aluminum) for anodized aluminum.
- The gears do interlock and will spin together at your touch! (but not on their own)
- Want to buy a piece, but don't see any designs that appeal to you? Reach out to us and we can work with you to create a listing just for you!
- If you want a totally custom design it is possible, but will cost more than the listings that you see here because of the extra work involved both to design plates and cut them by hand.
- Because we make all pieces to-order, we use digital renders for most of our product images so that we can explore the huge number of possible designs you can achieve with our system.
Bezel and Rivet Height:
- Our bezels for gemstones are about 6.4mm in diameter and add about 3mm of height wherever there is a gemstone. Rivets are 3.3mm around and add 1.7mm of height.
- Size listed for pendants is without the bale. The bale adds about 8-9mm to the total length of the pendant.
- Thickness is 4.6mm for thin gear pendants and 7.6mm for thick gear pendants unless stated otherwise.
- Gearless pendants come at the 4.6mm thickness.
- The planetary gears are about 44mm in diameter.
- The shepherd hooks we use will are 21 gauge wire.
- Designs hang about 9mm down from where your piercing is.
- The length of the leather cord we use is 91.44cm (36in)
- Size listed for bolo ties is only for the pendant-like portion.